C5-1000 (blue: C5-1000b / grey: C5-1000g)
CAT 5 Enhanced Wire 1000' Payout Box

Specifications
Cat 5e 4 twisted pair cable rated for category level 5. 8-conductor solid copper 24 ga. wires with color-coded pairs. Sequential foot markers on the wire that start at 1,000 ft. This allows you to easily see how much wire is left in the box when wiring multiple runs throughout the home or business. Device and zone markings make it easy to mark the wires so they are easily identified when terminating. Convenient pay out box doesn't get tangled when pulling wire. Enhanced to 150MHz and UL verified. CMR and MPR rated wire.

Keystone Wall Plates
Standard wall plates for keystone type connectors. Allow maximum flexibility to configure your network installation. Accept multi-colored keystone jacks or use inserts for coaxial (BNC) and/or "F" connectors. Use for voice or data.

KWP-1 (ivory: KWP-1i / white: KWP-1w)
KWP-2 (ivory: KWP-2i / white: KWP-2w)
KWP-3 (ivory: KWP-3i / white: KWP-3w)
KWP-4 (ivory: KWP-4i / white: KWP-4w)
KWP-6 (ivory: KWP-6i / white: KWP-6w)

Low Voltage Mounting Brackets Existing Construction

Specifications
Open back design allows room for deep mounting depth of volume controls and can accommodate the speaker wire going to it for ease of installation. Bracket is its own template for cut out , adjusts to fit 1/4" to 1" thick wallboard paneling and drywall. Specially designed wing flips up when mounting screw is tightened for a secure mount.

1GLV-CR-OW (single gang)
2GLV-CR-OW (double gang)

Low Voltage Mounting Brackets New Construction

Specifications
Non-conductive, smooth plastic construction is perfect for communications, cable TV, computer wiring and audio installations. Open back design allows room for deep mounting depth of volume controls and can accommodate the speaker wire going to it for ease of installation. Permits the use of 3/4" EMT, adjusts to fit 1/2" to 5/8" thick drywall.

1GLV-CR-NC (single gang)
2GLV-CR-NC (double gang)

WH-IRR-KJ
IR Receiver Keystone Jack

Specifications
The WH-IRR-KJ is an IR receiver that fits into any standard Keystone wall plate. It allows for the discrete placement of an IR receiver without the bulkiness of other receiver units. The IR receiver features spring terminals for simple installation and uses standard Cat5/5e cable for transmitting the IR signals. Accepts up to 22ga. solid wire.

WH-IRE-KJ
IR Emitter Keystone Jack

Specifications
The WH-IRE-KJ is an IR emitter port that fits into any standard Keystone wall plate. It allows for the discrete placement of an IR mouse emitter without the bulkiness of other emitter units. The IR emitter features spring terminals and a mini jack for simple installation it uses standard Cat5/5e cable for transmitting the IR signals. Accepts up to 22 ga. solid wire.

WH-IRE-KJ
Wired Home WH-IR4000 Decora Style IR Target White

Specifications
More and more homes are being outfitted with hidden source equipment, be it in cabinets, closets, or the basement. In order to remain in control of your components, an IR distribution system is needed. To maintain dÉcor aesthetics, the engineers at Wired Home have developed the WH-IR4000. This single-gang Decora style IR target disappears on a wall due to it's light-switch appearance.

WH-IRE-KJ
Wired Home WH-IR3500 IR Tube Target

Specifications
More and more homes are being outfitted with hidden source equipment, be it in cabinets, closets, or the basement. In order to remain in control of your components, an IR distribution system is needed. To maintain dÉcor aesthetics, the engineers at Wired Home have developed the WH-IR3500. This IR tube style target is smaller in diameter than a penny and can hide anywhere. Brass construction ensures durability.

WH-IRH:
15 Target IR Hub
Specifications
The WH-IRH is the heart of an IR system. A single hub is capable of supporting up to 15 targets and four emitters. Additionally, a Wired Home IR system can be expanded by paralleling hubs for a complete whole house control system with an almost unlimited amount of zones. Built into the WH-IRH is an LED for confirmation of signal to reduce troubleshooting time. Also built-in is a status power port which is connected to a 12V trigger or a 12 VDC power supply connected to the switched electrical outlet of an AV device.

IR Mouse Emitters

The IR mouse emitters are used in conjunction with the WH-IRE-KJ. The dual (WH-2IRME) and single (WH-1IRME) emitters each feature a small infrared LED that mounts over the IR window of any electronic component. The self-stick adhesive allows for easy mounting. It contains a visible confirmation LED to let you know when the signal is present and a mini plug for simple installation with the Wired Home products or with other IR emitter blocks. Includes a 10 ft. cord with a 3.5mm plug. Flasher measures: 7/8" L x 1/2" W x 5/8" H.