WH-8TH
WH-12TEH
WH-8THDSL
TPDT-110
TPDH-66
Keystone
Telephone
RJ12
Blank
New Construction
Exsiting Constr.


Low Voltage Mounting Brackets Existing Construction

Specifications
Open back design allows room for deep mounting depth of volume controls and can accommodate the speaker wire going to it for ease of installation. Bracket is its own template for cut out , adjusts to fit 1/4" to 1" thick wallboard paneling and drywall. Specially designed wing flips up when mounting screw is tightened for a secure mount.

1GLV-CR-OW (single gang)
2GLV-CR-OW (double gang)

Low Voltage Mounting Brackets New Construction

Specifications
Non-conductive, smooth plastic construction is perfect for communications, cable TV, computer wiring and audio installations. Open back design allows room for deep mounting depth of volume controls and can accommodate the speaker wire going to it for ease of installation. Permits the use of 3/4" EMT, adjusts to fit 1/2" to 5/8" thick drywall.

1GLV-CR-NC (single gang)
2GLV-CR-NC (double gang)

Blank Keystone Inserts

KMF7 (ivory)
KMF9 (white)



Specifications
Wired Home blank keystone modules clean up empty ports on a keystone wall plate for a neat, finished appearance. Designed to work with all Wired Home keystone wall plates, patch panels, and surface mount keystone jacks.
RJ12 Keystone Inserts

KJ-RJ12
(black: KJ-RJ12-bk / white: KJ-RJ12-w / ivory: KJ-RJ12-i)

Specifications
Superior quality category 5 data keystone type RJ-12 6 position jack. Superior quality 110 type insulation displacement IDC color coded connector. Accepts 22-26 gauge solid or stranded wire. 50 micron gold plating insures years of reliable use. Complies with IEEE standards 802.3 and 802.5. UL approved.
Telephone Wall Plates

TWP (ivory: TWP-i / white: TWP-w)
Rectangular flush mount wall jacks. 4 to 8 conductor. USOC RJ-11 type. Screw terminals.
TCWP-I
Wall Plate. Flush mount RJ-11 phone jack with an F-81 connector for use with cable TV. UL listed.
THWP-1
Convenient wall jack for hanging trimline type telephones. Ivory color case.
TWP-DW
Two piece Decorar type wall plate and phone jack. Fits in a standard electrical outlet box.
TPDH-66
66 Type Head for Telephone Punchdown Tool

Specifications
Telephone punchdown tool replacement head. 66 type.

TPDT-110:
Telephone Punchdown Tool

Specifications
Designed for terminating 110/88 type quick connect blocks. Place wire in position, set the tool over the split terminal and with a slight pressure, push the wire into the terminal. Spring tension can be adjusted to control impact. Includes one 110/88 type head.

Keystone Wall Plates
Standard wall plates for keystone type connectors. Allow maximum flexibility to configure your network installation. Accept multi-colored keystone jacks or use inserts for coaxial (BNC) and/or "F" connectors. Use for voice or data.


KWP-1 (ivory: KWP-1i / white: KWP-1w)
KWP-2 (ivory: KWP-2i / white: KWP-2w)
KWP-3 (ivory: KWP-3i / white: KWP-3w)
KWP-4 (ivory: KWP-4i / white: KWP-4w)
KWP-6 (ivory: KWP-6i / white: KWP-6w)
C5-1000 (blue: C5-1000b / grey: C5-1000g)
CAT 5 Enhanced Wire 1000' Payout Box

Specifications
Cat 5e 4 twisted pair cable rated for category level 5. 8-conductor solid copper 24 ga. wires with color-coded pairs. Sequential foot markers on the wire that start at 1,000 ft. This allows you to easily see how much wire is left in the box when wiring multiple runs throughout the home or business. Device and zone markings make it easy to mark the wires so they are easily identified when terminating. Convenient pay out box doesn't get tangled when pulling wire. Enhanced to 150MHz and UL verified. CMR and MPR rated wire.
WH-8THDSL:
8 Port Telephone Module w/ DSL Filtering

Specifications
  • Provides DSL filtering
  • Supports any combination of up to four phone lines to eight locations
  • Requires a 110 punch down tool.



  • Larger Image
    WH-12TEH:
    12 Room Telephone Distribution Hub

    Specifications
  • 12-port expansion hub
  • Supports distribution of any combination of four lines up to twelve locations
  • Designed for most structured wiring panels
  • Requires a 110 punch down tool



  •  Manual


    Larger Image
    WH-8TH:
    8 Room Telephone Distribution Hub

    Specifications
  • 8 room telephone hub
  • Features a RJ31X port for integrating into a home security system
  • Supports any combination of up to four phone lines to eight locations
  • Requires a 110 punch down tool



  •  Manual


    Larger Image
     
    Telephone Distribution

    A telephone distribution system allows an incoming telephone line to be sent to multiple locations without signal loss. The main telephone hub usually allows for four incoming phone lines to be sent to eight different locations. If more locations are needed then add-on expansion hubs can be used for an infinite amount of locations.
     

    Home

    Site Map

    Contact